The Indoor RV Speaker # 324-000001 that you referenced would be hardwired to your TV or stereo using standard speaker wire. The speaker itself features negative and positive terminals on the back for the wiring.
We don't have any similar RV speakers that connect via Bluetooth. I have attached a short video review below on this particular unit that you can check out as well. view full answer...
It sounds like you're asking if the Jensen Merchless RV Stereo, part # JWM10A, can link to bluetooth speakers, or if they need to be hardwired.
This stereo does in fact need to be hardwired to speakers. The bluetooth function of this stereo is meant as a receiver, not as a transmitter. view full answer...
The iRV Digital In-Wall Receiver - Bluetooth - Multi Zone # 292-101079 has the ability to connect with your phone and receive the Bluetooth signal. It does not send a Bluetooth Signal, so it won't connect with your Bluetooth speaker for outside use (just like your phone's speaker won't be able to be used as the receiver of that signal). The iRV receiver is multi-zone so you can set up a zone for outdoor speakers if you desire which is common with many RVs. view full answer...
The iRV RV Stereo w/ DVD Player - Single DIN - App Control, Bluetooth, HDMI, USB # 292-101809 can not be connected to a Bluetooth speaker. This stereo was designed to be wired into up to 6 speakers.
The Bluetooth capabilities are referring to you to connecting your smartphone to the stereo and playing the audio from the connected speakers.
I have attached a wiring diagram for you to check out as well. view full answer...
Yes, the Jensen RV Speakers w/ Grilles # HDS3000 can be used on the inside or outside of an RV. The marine-grade titanium construction is UV resistant and waterproof but it would beneficial for longevity to try to keep them somewhat protected from the elements. view full answer...
Yes, the Jensen RV Stereo - Double DIN - HDMI, AUX/USB, Bluetooth - 48W - 2 Zone - 12V # JWM45 is designed to be wired directly to your speakers. I've attached the wiring diagram from the owner's manual to help assist you in this process. You'll just simply need to splice the specific wires to their respective speaker wires. Once you have the speakers wired you can then complete the connection to your TV using an HDMI cable # 324-000008 and set your stereo to TV to play the sound through... view full answer...
Yes, you can connect an external sound system to the Jensen LED RV Smart TV # ASA38VR.
What you can use is the Furrion RV Soundbar # FSB2N25MCBL. view full answer...
Yes. The Jensen RV Stereo # JWM60A can support up to 8 speakers and can be setup in up to 3 zones. This will allow you to connect up to 8 Polk audio, or speakers from any manufacturer to this unit and has a maximum power output of 48 watts.
I've linked a short review video of this unit, as well. view full answer...
In regards to the Furrion RV Stereo part # DV3300SBL, there are two zones for a total of four speakers. The zones each have a left and right speaker input. view full answer...
The iRV Wall Radio - Audio/Video - DVD - Bluetooth - USB # 292-101809 comes with 3 zones and the ability to use 6 speakers plus a subwoofer. view full answer...
I reached out to my contact at iRV and he verified that all 3-zones (or all 6 speakers) can be played at the same time with the iRV RV Stereo # 292-101809. Just be sure you're able to provide around 15 to 20 amps of power to the unit and it's going to work perfectly for your application.
I have attached a short video review that you can check out as well. view full answer...
The Furrion RV Stereo # DV3300SBL referenced in your question does feature an HDMI output with ARC function so you will indeed be able to connect it with your Furrion TV to play audio through the speakers. When doing this just make sure the ARC function of the TV is also on. view full answer...
According to the user manual for your Pyle Speakers, each of your Pyle speakers should have four connection points, two of them run to your audio receiver/amplifier, and the other two run to a 12V power source.
We do have an exact replacement for the Jensen speakers you were using previously, # MS5006WR. These should wire up to the existing wiring on your RV, so you wouldn't have to change any of your wiring. Check out the video linked below for more details. view full answer...
The Jensen LED RV TV # JE2417 has three ports (SPDIF, AV input, and an audio output for digital audio) for you to plug in your speaker bar, located on the back of the TV. view full answer...
Yes, the Jensen RV Stereo - Double DIN - AUX/USB, Bluetooth, jControl - 12V # JWM60A can play music in multiple zones. The three speaker output buttons (19, 21, 23) (Zone A, Zone B and Zone C) control speaker zones output from the radio. Press any of the three buttons to turn the corresponding speaker zone on or off. SPK A (Zone A), SPK B (Zone B) or SPK C (Zone C) will appear on the display. view full answer...
There is no physical Bluetooth button on the RV Bluetooth Portable Speaker # DR65FR the Bluetooth feature is always on, so you'll just need to go into your Bluetooth menu on your device and select "EEVD-08".
From here you should be connected and the speaker will receive a Bluetooth signal from up to 10 meters (32.8'). view full answer...
In regards to the Jensen RV Stereo part # JWM45, there are two zones each of which can support two speakers for a total of four. The zones can be cycled through using the zone buttons on the faceplate or wireless remote. It will not hurt the system to only hook up one zone. view full answer...
The simplest way to accomplish getting the speakers all through the rv for the sound on the tv is to use the Jensen Stereo Audio/Composite Video Cable # JCAV50. There should be a white and red audio input on the back of your tv, plug them in.
On the rear of the Jensen Stereo Bluetooth # JWM60A plug in the other end of the red and white cables. Change the input option on the Jensen Stereo to AUX or Auxiliary. At this point any sound that plays through your TV should play through the speakers... view full answer...
The Jensen RV Stereo part # JWM60A as with all of our stereos which have Bluetooth only allow for input connections like pairing a mobile device to access a playlist. It would not allow for you to playback audio via a set of Bluetooth speakers or headphones for example. This will be the case for pretty much all stereos which have Bluetooth. view full answer...
The Jensen RV Stereo part # JWM45 is a double din stereo which requires a cutout size of roughly 7-3/8 wide x 3-1/2" tall. The cutout can be larger than this yes but not larger than 8-3/16" wide x 3-3/8" tall as that is the size of the face. There are two zones on this stereo so you can have one zone for the outside speakers and one zone for the inside speakers and they can both be played at the same time if needed. view full answer...
Go To Results